Setting The Printhead Pressure - Novexx ALX 924 User Manual

ALX 92x
User Manual

Setting the printhead pressure

CAUTION!
Shortened service life of printhead.

Always set the weakest printhead
pressure that will produce acceptable
printing results.
Different material widths and thicknesses affect the
contact pressure of the printhead on the print roller.
The contact pressure can be set with an adjusting knob
[53A] in 3 stages:
• Stage "I": position for very thin and/or narrow
material
• Stage "II": (pre-setting) position for material of
medium width/thickness
• Stage "III": position for very thick and/or wide
material
Tools: coin or large screwdriver
Setting:
 Turn the adjusting knob until the arrow of the knob
[54A] is positioned over the mark for the desired stage.

The adjustment knob locks into 3 position.
09/2016 | 00
[53] Adjustment knob for printhead pressure (A).
[54] Move the adjustment knob to one of the three locking positi-
ons.
63
A
A
Startup and Operation