Standalone Mode - Novexx ALX 924 User Manual

ALX 92x
User Manual

Standalone mode

In standalone mode, print jobs are not transferred via data cable but are instead stored on a mem-
ory card. You can access them there from the printer control panel or using a connected keyboard.
Activate standalone mode
1. Switch off the machine.
2. Save relevant print jobs in the \Formats directory on the memory card.

Files with print jobs must have the ending *.for.
3. Insert the memory card in the printer's card slot.
4. Switch on the machine.
Initial operating mode: online or offline.
5. Press the ONLINE + PROG keys.
Screen:
Select file
Novexx.for
a) Filename of the print job. If there are several print jobs: fi-
lename of the first print job in alphabetical order.
Screen if no file was found:
Standalone
No files!
Starting a print job
1. Activate standalone mode as described above.
2. If there are several print jobs: Press the FEED / APPLY keys keys until the required print job
appears.
3. Press the ONLINE key to confirm the selection.
Screen:
Enter quantity
a) Assignment for quantity (in this case x) is included in the
print job.

Depending on the print job, the user may be prompted for additional entries.
4. Press the ONLINE key to confirm the number or the Esc key to delete the number.
5. Proceed in the following manner for each required digit:
– Press the FEED / APPLY keys to select a number from 0 to 9.
– Press the ONLINE key to move to the next digit.
6. Press the ONLINE key twice to confirm the selection.
The print job is now processed.
7. You can also optionally press the ONLINE + PROG keys to switch to online mode.
09/2016 | 00
a
a
x
43 Product description