Table of Contents
Advertisement
2. Remove the screw fixing the body partition assy and the
cord reel unit.
3. Remove the cord reel unit from the body partition assy.
4.5.
Spring-loaded cord reel pre-
winding
1. The body partition assy has a spring that pre-winds the
cord reel.
If the cord is not wound, then press the brake lever unit,
and the cord pre-winding will be loosened.
Pre-wind the cord as indicated by the arrow mark.
Number of pre-windings: Four turns
* If you wish to release the pre-winding, then make
sure to hold the cord plug.
4.6.
Installation of some Pakkin
1. Remove the two screws fixing the lower and front bodies.
2. Remove the front body from the lower body.
11
Hide quick links:
Advertisement
Table of Contents
