Table of Contents
Advertisement
4.9.
Spring-loaded cord reel
pre-winding
1. The cord reel partition U has a spring that pre-winds the
cord reel.
If the cord is not wound, then press the brake arm, and
the cord pre-winding will be loosened.
When making spare turns again, do it in the direction of
the arrow.
* Number of spare turns: Three turns
* If you want to release the pre-winding, then make
sure to hold the cord plug.
4.10. How to disassemble the
turbine nozzle
4.10.1. Agitator ass'y
1. Rotate the Lock on the brush cover to unlock and remove
the brush cover U.
2. Pull up the agitator ass'y and remove the belt and agitator
ass'y (complete). (Fig.29)
4.10.2. Separation of the floor nozzle
upper U from the floor nozzle
lower U
1. Remove the four screws fixing the floor nozzle lower U.
(Fig.30)
2. Remove the floor nozzle lower U.
4.10.3. Turbine Ass'y
1. Pull up the floor nozzle wand U and remove the turbine
ass'y. (Fig.31)
12
Advertisement
Table of Contents
