Destination - Kurzweil Forte Manual

Parameter

Destination

ChangeMultis
Bank Select
PrgChangeMode
LocalKbdChan
SysExID
Program Change
Destination
The Destination parameter determines the destination of MIDI data generated by striking
keys or activating controllers. This data can be sent to the Forte sound engine, through the
MIDI out ports, or both. You can set this parameter to NONE, or any combination of the
three available destinations.
Note that this parameter is always active and works in conjunction with the Multi Mode
Destination parameter (see
Destination parameter is set to USB+MIDI+LOCAL and the Global Mode parameter is set
to LOCAL, the MIDI data will only be transmitted locally.
Range of Values
NONE, LOCAL, MIDI, MIDI+LO-
CAL, USB, USB+LOCAL, US-
B+MIDI, USB+MIDI+LOCAL
Immediate, AllKeysUp
Ctl 0, Ctl 32, Ctl 0/32
Extended, K2600
None, 1 to 16
0 to 127
On, Off
page 11-9). These parameters act like filters, so if the Multi Mode
Global Mode
MIDI Page
Default Value
USB+MIDI+LOCAL
Immediate
Ctl 0/32
Extended
None
0
On
12-13