Multi Edit Mode
COMMON Page
Output
This parameter specifies the physical audio output pair for the corresponding Aux Chain's
output. The settings A and B refer respectively to the A and B physical audio outputs of the
Forte. Setting Output to Auto uses the output pair specified in the program on the specified
Aux Effects channel.
COMMON Page
The COMMON page contains parameters that affect every zone in the current Multi.
Press the COMMON soft button to enter the COMMON page.
COMMON Page Parameters
Tempo
Clock Source
KB3 Channel
Tempo
When Clock Source (see
sets the Forte's system tempo for this Multi. The Tempo parameter values are in units of
BPM (beats per minute). This controls the tempo of any tempo based effects.
You can also set the tempo using the Tap Tempo button (located on the front panel above the
Pitch Bend Wheel.) Tap the Tap Tempo button on beat for a measure or two at the desired
tempo to set a tempo. This also brings up the Tap Tempo page (see
page
3-7).
11-30
Parameter
20 to 400 BPM
Internal, External
1 to 16
Clock Source on page
Range Of Values
12-5) is set to Internal, the Tempo parameter
Default Value
120
Internal
1
Tap Tempo Button on