Saving A User Multi - Kurzweil Forte Manual

Multi Mode
Save User Multis
Use the Left/Right cursor buttons or <<< >>> soft buttons to move the cursor. Press the +/-
button to switch between upper and lower case characters (all characters will be upper case
until you press the +/- button again).
Use the Space button to change the current character to a space, the Insert button to insert a
blank space (the selected character and all characters to the right will move one space to the
right), and the Delete button to delete the current character (all the characters to the right
will move one space to the left).

Saving a User Multi

Press the Save button or Save soft button to complete the saving process, or press the Cancel
soft button to exit without saving. After successfully saving, the Multi will be selected in
Multi Mode. To find the Multi again later, press the User button and scroll to the Multi ID.
You can also type the Multi ID number, then press the Enter button.
10-15