Lowharm; Highharm; Stealbar; Perclevel, Decaytime, Orglevel - Kurzweil Forte Manual

LowHarm

Controls which drawbar is used as the basis for the percussion when Harmonic is set to Low.
On an actual tone wheel organ, this is Drawbar 4 (2nd harmonic). The actual pitch obtained
depends on the drawbar tuning.

HighHarm

Controls which drawbar is used as the basis for the percussion when Harmonic is set to
High. On an actual tone wheel organ, this is Drawbar 5 (3rd harmonic). The actual pitch
obtained depends on the drawbar tuning.

StealBar

Controls which drawbar is disabled when the percussion effect is turned on. On an
unmodified tone wheel organ, the ninth drawbar is the one disabled. Any drawbar can be
selected.

PercLevel, DecayTime, OrgLevel

Parameter Group (Available for each combination of
the Volume and Decay parameters on the PERC page)
Percussion Level
Decay Time
Organ Volume Level
With these parameters you can control the amplitude and decay time of the percussion effect
for all combinations of the Volume and Decay parameters (on the PERC page). You can
also adjust the level of the organ relative to the percussion, for accurate emulation of classic
organs.
Program Edit Mode
KB3 Editor: The PERC Page
Range of Values
0 to 24.0 dB
0.01 to 5.10 seconds, in 0.02-second increments
-12.0 to 12.0 dB
7-93