Ups Configuration - Seenergy svr-632u nvr User Manual

SVR-632U/S User Manual 229
• The USB hard disk needs to have more than 100MB remaining
space • If multiple partitions are presented in one disk, only the first
partition will be detected and used for backup
Process:
• Progress will be displayed on the UI
• If the backup process gets interrupted, which the process stops at a
point of time that is before the "END Time" user defined, such time will
be displayed on the UI
• A folder will be automatically created in the USB hard disk with a
name format like 0028687831_20100610151515_2010060511
0010_20100606110010 (MAC_backupbuttonclicktime_starttime_
endtime)
Note:
• Please plug in the USB HDD only after the NVR is fully started, or the
HDDs will be incorrectly mounted.
• Play the backed up files using the NVR media player.

UPS Configuration

To enable local UPS support (NVR acting as UPS
server):
1. Connect the compatible USB UPS to the NVR
2. Turn on the NVR
3. Go to "NVR Setup" >> "UPS", and check "Enable UPS Support"
option.
You can adjust how long the UPS stays on to provide backup electricity
to the NVR after a power failure by choosing one of the options from
the drop-down shown below: