194
SVR-632U/S User Manual
Disk
Once you install a new hard disk to the recorder, it will be listed in this
page and shown status "offline. You would need to initialize it so that it
can be ready for recording. You can obtain basic information about the
disk you installed in this page.
To initialize it, simply click the "Format" button.
*This page will list the Internal disks (or RAID volumes), and the E-
SATA disk only. The HDD will be formatted in EXT4 file system.
*The USB HDDs will only be listed in the "USB Backup" page. The USB
HDDs have to be formatted in advance in FAT32 file system.
* The internal disks that are formatted in EXT4 will be listed in this
page and shown as "Online" after they are installed to the NVR. It's
highly recommended that it's formatted by the NVR, which will be
formatted to EXT4 file system to ensure best performance.