Seenergy svr-632u nvr User Manual page 230

230 SVR-632U/S User Manual
* Currently only APC Smart-UPS 750 is supported (05282012)
The UPS information should be obtained and displayed at the bottom
of the page after the settings are applied:
To enable network UPS support (NVR acting as UPS
slave):
1. Go to "NVR Setup" >> "UPS Configurations", and check "Enable UPS
Support" option.
2. Enter the IP address of the NVR running as UPS server. (The
NVR with USB UPS physically attached to)