Quality Assurance Statement - Honeywell vk41 series Handbook

QUALITY ASSURANCE STATEMENT

Products are manufactured under an ISO 9001 (1994) based
and certified Quality System.
The quality system is described in the Honeywell Combustion
Controls Center Quality Assurance Programme and its related
operational procedures and instructions.
The quality system is approved by Gastec against certificate
number 9.302/2.
The quality organisation is responsible for defining,
maintaining, improving and verification of the quality systems
in the field of design, production process and field quality
service.
Assembly processes are guided by work instructions. Patrol
inspections form part of the assembly processes.
At the end of the assembly phase, all gas controls are leakage
and performance tested/adjusted.
Assembly inspection is performed by employees of the quality
control department, using their own authorised equipment.
All inspections (incoming and assembly) are performed by
trained personel and according inspection procedures.
29 EN2R-9004 0606R20-NE