Honeywell vk41 series Handbook page 22

3
With / " nut and olive ( fig. 5 .)
4
Pipe diameter: 15 mm
Nut: drawing:........................................ 45.006.583-003
Fastening torque: maximum 50 Nm
Pipe end construction: square off end of tubing and
remove burrs.
Fig. 5. External thread connection with nut and olive
3
With / " nut and "O"-ring ( fig. 6 .)
4
Pipe diameter: 15 mm
Nut: drawing:........................................ 45.006.583-003
"O"-ring size: ∅14.3 x ∅2.4 mm
drawing ................................................ 45.001.583-003
Fastening torque: maximum 50 Nm
Pipe end construction: fig. 9 .
Fig. 6. External thread connection with nut and "O"-ring
3
With / " nut and flat sealing ring for pipe 15 mm ( fig. 4 .)
4
Nut: drawing:........................................ 45.006.583-003
Flat sealing ring according to DIN 3535-6 with size
∅24 x ∅16 x 1.5 mm:
drawing ................................................ 45.006.582-001
Fastening torque: maximum 50 Nm
Pipe end construction: fig. 10 .
EN2R-9004 0606R20-NE
minimum 30 Nm
minimum 10 Nm
minimum 30 Nm
3
With / " nut and flat sealing ring for pipe 18 mm ( fig. 4 .)
4
Nut: drawing: ........................................ 45.006.583-002
Flat sealing ring according to DIN 3535-6 with size
∅24 x ∅16 x 1.5 mm
drawing................................................. 45.006.582-001
Fastening torque: maximum 50 Nm
Pipe end construction: fig. 11 .
14
Fig. 7. Pipe (dia 14 mm) for flat sealing ring connection
15
Fig. 8. Pipe (dia 15 mm) for flat sealing ring connection
15
Fig. 9. Pipe end for "O"-ring connection
15
Fig. 10. Pipe (dia 15 mm) for flat sealing ring connection
18
Fig. 11. Pipe (dia 18 mm) for flat sealing ring connection
Pressure feedback connection
WARNING
To avoid decreasing of performance of pressure
regulator by pinching off the pressure feedback tubing,
it is recommended to use a tube material which will not
kink.
22
minimum 30 Nm
+ 0.2
18
- 0.2
1
+ 0.2
18
- 0.2
1
23.4 +/- 0.15
+ 0.10
15
- 0.05
1
7.5 +/- 0.2
+ 0.2
23.4
- 0.2
1
+ 0.2
23.4
- 0.2
1