Panduit Cougar LS9 Operator's Manual page 38

PRINTER CLEANING INSTRUCTIONS
Cleaning the Cutter Blade
The cutter blade should be cleaned when the quality of the cut indicates that the
blade may be dirty.
1. Turn OFF power to printer.
2. Remove the cassette door.
3. Unlock the print head latch.
4. Remove the label cassette from the printer.
5. Push the cutter button in so that the cutter blade is exposed through the
media opening (see images below).
6. Clean the front and back sides of the cutter blade with the cotton swab and
cleaning solution.
7. Repeat until no more residue is picked up by the swab.
38