Panduit Cougar LS9 Operator's Manual page 33

LABELING EXERCISES
Exercise 4
Create serialized wire markers with heat shrink tubing
•
Step 1: Insert a heat shrink tubing label cassette such as H000X044F1C
•
Step 2: When prompted, select New Blank File. Save previous label if
necessary.
•
Step 3: Type WIRE
•
Step 4: Press INSERT key
•
Step 5: Press down arrow key once to highlight Serial
•
Step 6: Press
•
Step 7: Press right arrow key
•
Step 8: Type 1 for Start value
•
Step 9: Press
•
Step 10: Press right arrow key
•
Step 11: Type 3 for End value
•
Step 12: Press twice
•
Step 13: Press PRINT
Results:
Heat Shrink Serialization...
WIRE1 WIRE2
WIRE1 WIRE2
...Using Cut/Pause Function
WIRE1 WIRE2
WIRE1 WIRE2
Hint: The Serial tool allows numeric or alphabetic
serializations.
You can choose any increment from 1 to 99,
print multiple copies of a series, and even
collate the copies of the series items.
Heat shrink tubing can be partially cut to create
a strand of individual markers. The Cut/Pause
function in the Setup Menu will pause a print
job between each consecutive label for cutting.
WIRE3
WIRE3
WIRE3
WIRE3
33