Carrier 42cvur018-703 Service Manual page 5

CAUTION
•
Exposure of unit to waer or other moisture before installation could result in electric shock.
Do not store it in a wet basement or expose to rain or water.
•
After unpacking the unit, examine it carefully for possible damage.
•
Do not install in a place that can increase the vibration of the unit. Do not install in a place that can amplify the
noise level of the unit or where noise and discharged air might disturb neighbors.
•
To avoid personal injury, be careful when handling parts with sharp edges.
•
Please read this installation manual carefully before installing the unit. It contains further important instructions
for proper installation.
•
This appliance must be connected to the main power supply by means of a circuit breaker depending on the
place where the unit is installed. Failure to do so may cause electrical shock.
•
Follow the instructions in this installation manual to arrange the drain pipe for proper drainage from the unit.
Ensure that drained water is discharged. Improper drainage can result in water leakage, causing water damage to
furmiture.
•
Tighten the flare nut with a torque wrench using the prescribed method. Do not apply excess torque. Otherwise,
the nut may crack after a long period of usage and it may cause the leakage of refrigerant.
•
Wear gloves (heavy gloves such as cotton gloves) for installation work. Failure to do so may cause personal
injury when handling parts with sharp edges.
•
Do not touch the air intake section or the aluminum fins of the outdoor unit. It may cause injury.
•
Do not install the outdoor unit in a place which can be a nest for small animals. Small animals could enter and
contact internal electrical parts, causing a failure or fire.
•
Reques the user to keep the place around the unit tidy and clean.
•
Make sure to conduct a trial operation after the installation work, and explain how to use and maintain the unit to
the customer in accordance with the manual. Ask the customer to keep the operation manual along with the
installation manual.
•
The manufacturer shall not assume any liability for the damage caused by not observing the description of
this manual.
– –
4
FILE NO. SVM-12052