Carrier 42cvur018-703 Service Manual page 39

8. PRESET OPERATION
Set your preferred operation for future use. The setting will be memorized by the
unit for future operation (except air flow direction).
1. Select your preferred operation.
2. Press and hold
displays.
3. Press : Operate the preset operation.
9. AUTO RESTART OPERATION
To automatically restart the conditioner after the power failure (Power of the unit must be on.)
Setting
1. Press and hold the RESET button on the indoor unit for 3 seconds to set the
operation. (3 beep sound and OPERATION lamp blink 5 time/sec for 5 seconds.)
• Do not operate ON timer and OFF timer.
2. Press and hold the RESET button on the indoor unit for 3 seconds to cancel the
operation. (3 beep sound but OPERATION lamp does not blink)
10. ECO SLEEP OPERATION
For ECO sleep automatically control air flow and automatically turn OFF.
Press : Select 1, 3, 5 or 9 hrs for OFF timer operation.
Note : The cooling operation, the set temperature will increase automatically
0.5 degree/hour for 4 hours (maximum 2 degrees increase).
11. QUIET OPERATION
To operate at super low fan speed for quiet operation (except in DRY mode)
Press : Start and stop the operation.
Note : Under certain conditions, QUIET operation may not provide adequate
cooling due to low sound features.
for 3 seconds to memorize the setting. The
–
38
P mark
–
FILE NO. SVM-12052