wsm m9540 Workshop Manual page 37

M9540Low Profile, WSM
Hydraulic Pack Assembly
1. Remove the hydraulic pack assembly (1).
(When reassembling)
• Replace the seal rings (2) with new one, if they have deformed or
any damages.
• Apply grease to the seal ring (2).
(1) Hydraulic Pack Assembly
4WD Hydraulic Pack
1. Refer to the "DISASSEMBLING AND ASSEMBLING" at "3.
TRANSMISSION".
Bi-speed Turn Clutch Pack
1. Remove the seal rings (3) and bearing (6) from the 4WD shaft
(1).
2. Remove the Bi-speed turn clutch pack (5).
3. Remove the 33T gear (4), after removing the key (2).
L3-S10
TRANSMISSION
(2) Seal Ring
W1014413
W1014706
W1014782
KiSC issued 09, 2008 A