Solenoid Valve - wsm m9540 Workshop Manual

M9540Low Profile, WSM

(3) Solenoid Valve

Solenoid Valves
1) Connector Voltage
1. Remove the connector (2).
2. Set the 4WD/Bi-speed turn switch to bi-speed position.
3. Measure the voltage across the terminal 4 and chassis.
4. If the voltage differs from battery voltage, the wiring harness, fuse
or main switch is faulty.
Voltage Terminal 4 – Chassis
2) Solenoid Valve
1. Disconnect the wire harness connector (2).
2. Measure the resistance with an ohmmeter across the each
terminal 4 on the connector (2) and chassis.
3. If infinity is indicated, the solenoid valve is faulty.
Solenoid valve 4
Resistance
terminal to chassis
(1) Solenoid Valve Assembly
(2) Connector
(3) Terminal 4 for Bi-speed Turn
Solenoid Valve
(4) PTO Solenoid Valve
L9-S11
ELECTRICAL SYSTEM
Approx. battery voltage
10 to 12 Ω
(5) Bi-speed Turn Solenoid Valve
(6) 4WD Solenoid Valve
(7) Rear Differential Lock Solenoid
Valve
W1016001
KiSC issued 09, 2008 A