Table of Contents
Advertisement
Two-way record is indicated on the display
by an advisory text and is added to the
answering machine list as a new message.
Press the display key to stop
§End§
two-way record.
The maximum recording time depends on
the memory available on the answering
machine. If the memory is full you will
hear an end tone, the recording is
aborted, and the call recorded up to that
point is listed in the answering machine
list as a new message.
Activating/deactivating call
screening
During recording of a message you can
screen a call via the loudspeaker of regis-
tered handsets.
Permanently activating/deactivating call
screening
¢
¢
Ì
v
Call Screening
Select display key to activate/
§Change§
deactivate the function.
Deactivating call screening for the current
recording
You can switch off the function on the
handset during the recording.
Press the display key.
§Silence§
Setting the recording
parameters
The answering machine has already been
preset at the factory. Make individual set-
tings using the handset.
¢
¢
v
Ì
Recordings
¤
Change multiple line input:
Length:
Select maximum recording time:
1
Min.,
2
Min.,
3 Min.
Operating the answering machine of the Gigaset SL785 base station
(³= on)
or Maximum.
Quality :
Select recording quality
or Excellent. If the quality is higher, the
maximum recording time is reduced.
Ring Delay:
Select when the answering machine
should accept a call:
No
delay, after
10
Automatic.
Press the display key.
§Save§
Information about call acceptance
In
Automatic
mode, the following applies
for call acceptance:
u
If there are no new messages, the
answering machine answers a call after
18 seconds.
u
If new messages are present, the
answering machine answers a call after
10 seconds.
When operating remotely (
you can tell after approx. 15 seconds that
there are no new messages (otherwise the
answering machine would already have
accepted your call). There will be no call
charges if you hang up now.
Please note:
You can configure your telephone so that
the first ring tone is muted on all calls
¢
(
page 44). This means that the time
selected for the call acceptance predeter-
mines how long the caller must wait
before the answering machine answers
the call.
Resetting fast access for the
answering machine using key 1
By default, key
has been assigned for
fast access to the integrated answering
machine. However, if you have set the net-
work mailbox for fast access (
you can reset this setting.
¢
¢
v
Ì
Set Key 1
Answering Machine
Select and press
Long
Play,
High
sec.,
18
sec.,
30 sec.
or
¢
page 50)
¢
page 51),
.
§OK§
49
Advertisement
Table of Contents
