Handset Settings; Quick Access To Numbers And Functions - Gigaset C610A Manual

Changing the set destination
number
É
¢ ¢
v
Room Monitor
¤
Enter and save number as described in
"Activating the room monitor and enter-
ing the destination number"
¢
( page 50).
Cancel/deactivate room monitor
Press the end call key a to cancel the call
when the room monitor is activated.
In idle state, press the display key
deactivate the room monitor mode.
Deactivating the room monitor
remotely
Prerequisite: The phone must support tone
dialing and the room monitor should be set
for an external destination number.
¤
Accept the call from the room monitor
and press keys 9 ;.
The call ends immediately and the room
monitor function deactivates. There will be
no further room monitor calls.
To reactivate the room function with the
same phone number:
¤
Turn on the activation again and save
¢
§Save§
with ( page 50).

Handset settings

Your handset is preconfigured, but you can
change the settings to suit your individual
requirements.
Quick access to numbers and
functions
You can assign a number from the directory
to each of the digit keys Q and 2 to
O.
The left and right display keys have a func-
tion pre-selected by default. You can change
¢
the assignment ( page 51).
The number is then dialed or the function
started by simply pressing a key.
Assigning digit keys
Prerequisite: You have not yet assigned a
number to the digit key.
Press and hold the digit key.
The directory is opened.
¤
Select an entry and press
The entry is saved on the appropriate digit
key.
§Off§
to
If you delete or edit the entry in the
directory at a later date, the Quick Dial
number assignment is not updated.
Dialing a number/changing
assignment
Prerequisite: The digit key already has a
number assigned to it.
When the handset is in idle state
¤
Press and hold the digit key.
The number is dialed immediately.
Or:
¤
Briefly press the digit key:
Press the display key with number/name
(abbreviated if necessary) to dial the
number.
Or:
¤
press the
the digit key assignment or to delete the
assignment.
Changing display key assignments
¤
Press and hold the left or right display
key.
The list of possible key assignments opens.
Select any of the following:
Room Monitor
Assign menu for setting and activating
the room monitor to a key (
Handset settings
Please note
§Change§
display key to change
§OK§
.
¢
page 49).
51