Resetting Fast Access On The Answering Machine; Operating When On The Move (Remote Operation) - Gigaset SL565 User Manual

Gigaset SL565 / GBR PTT / A31008-M1715-L111-2-7619 / answering_m.fm / 24.10.08
When operating remotely you then know
after approx. 15 seconds that there are no
new messages (otherwise the answering
machine would already have accepted
your call). There will be no call charges if
you hang up now.
¢ ¢
w Ð
Voice Mail
Select r
0 sec.
Automatic.
Press the display key.
§Save§
a
Press and hold (idle status).
Please remember:
You can set your telephone so that on all
calls the first ringtone is suppressed
(page 47). Therefore, the time set for the
call acceptance does not indicate how
long the phone rings before the answer-
ing machine accepts the call.
Setting the recording time
You can set the maximum recording time
of a message. The options are: 30, 60,
120 seconds or Maximum.
¢ ¢
w Ð
Voice Mail
Length
r
Select recording time.
Press the display key.
§Save§
Setting recording quality
Set the quality you require for your record-
ings. The options are: Standard, High,
lent. If the quality is higher the max.
recording time is reduced.
¢ ¢
w Ð
Voice Mail
r
Select the recording quality.
Press the display key.
§Save§
¢
Ring Delay
/ 10 sec. / 20 sec. / 30 sec.
¢
Message
Excel-
¢
Record Quality
Operating the answering machine
Resetting fast access on the
answering machine
The integrated answering machine is fac-
tory-set for fast access. However if you
have set the network mailbox for fast
access (page 39) you can reset this set-
/
ting.
¢ ¢
w Ð
Voice Mail
Answer Machine
Select and press
a
Press and hold (idle status).
After you have selected the network mail-
box or the answering machine, press and
hold key 1. You will be connected
directly.
The setting for fast access applies to all
Gigaset SL56 handsets.
Operating when on the move
(remote operation)
You can check or activate the answering
machine from any other telephone (e.g.
hotel, pay phone) or initiate callback from
the answering machine through an SMS.
Requirements:
u
You have set a system PIN other than
0000 (page 53).
u
The phone you are using for remote
operation has tone dialling (DTMF), i.e.
you hear different tones when you
press the keys. Alternatively, you can
use a code transmitter (available from
your mobile phone retailer).
¢
Set Key 1
/
Network Mailb.
.
§OK§
37