Connect The Base To The Router (Internet); Connect A Pc To The Router (Optional) - Gigaset c530 ip User Manual

Gigaset C530 IP / IM-Nord en / A31008-M2506-R201-1-3PG3 / install.fm / 3/6/14
Connecting the base
5

Connect the base to the router (internet)

B
As soon as the cable between the telephone and the
router is plugged in and the router is switched on, the
key on the front of the base lights up (paging key).
Data protection information: For more information
on the data saved in relation to the Gigaset.net service,
please go to
www.gigaset.net/privacy-policy.
6

Connect a PC to the router (optional)

You can connect a PC to your telephone using a router to change the settings of the base of your
telephone.
¤
Connect the network connection on your PC to another LAN connection on your router.
The following is based on the condition that your telephone is automatically assigned an IP
address by the router (i.e. DHCP is activated on your router and telephone).
In exceptional cases (e.g. when DHCP is not activated on the router), you must assign a fixed
IP address to the base for LAN access. You must enter this IP address on the handset before
carrying out the following steps.
For further information, please refer to the detailed user guide online at www.gigaset.com/
gigasetC530ip.
To enter this information, use the following handset menu:
v
¤
(press right on the control key)
system PIN if required)
8
A
¤
Insert one plug of the Ethernet
cable into the LAN connection
socket
¤
Insert the second plug of the
Ethernet cable into a LAN
connection socket on the router
.
B
Use the Ethernet cable supplied.
Ï
¤ ¤ ¤
System Local Network
on the side of the base.
A
¤
(enter the