Enter Voip Account Data - Gigaset c530 ip User Manual

Gigaset C530 IP / IM-Nord en / A31008-M2506-R201-1-3PG3 / configuration.fm / 3/6/14
If your provider is not on this list, cancel the VoIP wizard:
¤
Press and hold the End call key
¤
Change the configuration and assignment of the incoming and outgoing connection
using the web configurator. For further information, please refer to the detailed user guide
online at www.gigaset.com/gigasetC530ip.
11

Enter VoIP account data

¤
To switch between upper/lower case and digit entry: Press the
required).
¤
To delete incorrectly entered characters: Press the display key
of the cursor is deleted.
¤
To navigate within an entry field: Press right/left on the control key
User ID
:
< C
¤
Enter the registration name (user
identification) that you received from
your VoIP provider using the digit keys.
Note that this information is case-
sensitive.
¤
Press the display key
Depending on your provider, you may be requested to enter another name (User name) if
applicable. Enter this name as described above.
If the User name is identical to the User ID, simply press the right display key
If you have entered all the VoIP data fully and correctly, the message "Your IP account is
registered at your provider." will be shown in the display shortly afterwards. The VoIP wizard
will then close.
a
. Your handset will return to idle status.
Provider Data
Abc
OK
§OK§
.
Configuring VoIP connections
#
key (multiple times if
Ñ
. The character to the left
r
Provider Data
Password
:
< C
¤
Enter the registration password that you
received from your provider using the
digit keys. Note that this information is
case-sensitive.
¤
§OK§
Press the display key
.
Abc
OK
.
§OK§
.
13