Connecting The Base To The Router (Internet); Connecting The Pc To The Router (Optional) - Gigaset C610IP Manual

5

Connecting the base to the router (Internet)

B
A
As soon as the cable connecting the phone and router is
plugged in and the router is switched on, the key lights up
on the front of the base (paging key).
Data protection notice: Further information about
saving Gigaset.net service data can be found at
www.gigaset.net/privacy-policy.
6

Connecting the PC to the router (optional)

You can change the settings on the phone's base using a PC connected to your phone via the
router.
>
Connect the PC network connection to a free LAN socket on your router.
The procedure below requires that your phone is automatically assigned an IP address by the
router (i.e. DHCP is enabled on router and phone).
In exceptional cases (e.g. if DHCP is not enabled on the router) you will have to assign a static
IP address to the base for LAN access. You must enter this IP address on the handset before
carrying out the following steps. Further information on this can be found in the long user guide
(see enclosed CD).
v
The following handset menu can be used to make the entry:
(Press right on the control key)
if required)
Connecting the base
¢ Ï ¢
A
Connect one Ethernet cable plug to
the LAN socket at the side of the base.
B
Insert the second Ethernet cable plug
into a LAN socket on the router.
Use the Ethernet cable supplied.
¢
System Local Network
¢
(enter system PIN
7