Rack-Mounting By Using Front And Rear Mounting Brackets - H3C S5120-HI Series Installation Manual

b. The other person uses M6 screws and cage nuts (user supplied) to attach the switch to the rack.
Figure 17 Mounting the switch to the rack (front mounting brackets at the port side)
Figure 18 Mounting the switch to the rack (front mounting brackets at the power side)
5. Connect the one-hole lug grounding cable to the rear grounding point (see
grounding point to a grounding

Rack-mounting by using front and rear mounting brackets

This mounting method is applicable to only the S5120-28SC-HI and S5120-52SC-HI switches.
This task requires two people.
To install the switch in a 19-inch rack by using the front and rear mounting brackets:
1. Identify the mounting and grounding positions.
strip").
14
"Connecting the rear