Ordering Data - TESTO 325-I Instruction Manual

Instrument: 2 years
Sampling probe : 1 year
Accessories 6 months
Measuring cells 6 months
Printer 1 year (except printing
mechanism)
Warranty terms
Dear Customer,
Thank you for the trust that you have shown Testo by
purchasing this analyser. You have made a good choice.
However, should you have cause to complain about our
product, we will remedy, free of charge, any defects that can be
proved to be caused by a factory error. The prerequisite is that
you report this defect as soon as it is detected and within the
warranty period granted by us.
Wearing parts, such as, for example, rechargeable batteries,
measuring cells, filters, measuring elements, etc., as well as
very fragile parts are naturally excluded from this warranty. This
also applies for damages which have occurred due to improper
use or as a result of non-observance of the instruction manual.
The warranty is also invalid if the analyser has been opened -
provided this is not expressly described for maintenance
purposes in the instruction manual - or if serial numbers in the
device have been changed, damaged or removed.
The warranty period for hand-held instruments is 2 years, for
probes 1 year. If not otherwise defined, 6 months is the applica-
ble period for accessory parts. Actions carried out under
warranty do not result in an extension of the warranty period.
If in addition to the warranty actions necessary repairs,
adjustments or similar have been performed, the warranty
actions are free of charge, but the other actions, as well as
transport and packaging, are charged.
More extensive or other claims are excluded, particularly in the
case of damages arising which do not concern the device, pro-
vided that liability is not compulsorily stipulated by law.
Service after the warranty period
Naturally, we are here for you even when the warranty period
has expired. In the event of malfunctions, send us your measur-
ing instrument with a brief description of the fault. Please also
state your telephone number in case we have any queries.
With us CUSTOMER SERVICE is written in capital letters.
16
Warranty
Description
Device
Flue gas analyser testo 325-I (SO
Flue gas analyser testo 325-I (NO) incl. batteries
Flue gas analyser testo 325-I (CO
Flue gas analyser testo 325-I (CO
Flue gas probes
Flue gas probe (length 300 mm, T
Flue gas probe (length 300 mm, T
Cone for flue gas probe
Flue gas probe (length 700 mm, T
Printer
Testo printer
Accessories
Instrument SoftCase (for fixing to the boiler)
Instrument box (plastic type)
Power unit (230 V for mains operation)
GB power unit
J power unit
USA power unit
Replacement particle filter for testo 325-I (10 off)
Replacement paper for printer
Replacement cells
CO
low
COhigh replacement cell
SO2 replacement cell
NO replacement cell
) incl. batteries
2
) incl. batteries
low
) incl. batteries
high
+500 °C, SO
max
+500 °C)
max
+1000 °C) incl. special hose
max
for SO measurements
2
replacement cell incl. filter
17

Ordering data

testo 325-I
Part no.
0632.3260
0632.3261
0632.3262
0632.3263
) 0600.7541
2
0600.7542
0554.9050
0699.3451/3
0554.0545
0516.2570
0516.3250
0554.1084
0554.0041
0554.0052
0554.0053
0554.0040
0554.0569
0390.0168
0390.0142
0390.0143
0390.0144