Edit - Panasonic AJ-SD965 Operating Instructions Manual

Setup menus
(continued)
USER menu
<EDIT>
No./Item
301 This selects the operation to be performed
when an edit point has been set incorrectly
IN/OUT DEL (when the OUT point is before the IN point).
0000 MANU :
Editing is not executed unless the illegal edit
point is cleared or set again properly.
0001 AUTO :
The edit points already input are automatically
cleared.
303 This selects STD or NON-STD in accordance
with the composite input signal.
STD/
NON-STD 0000 AUTO :
Standard/non-standard
automatically identified and processed.
0001
Standard signals are processed. (Forced
STD)
0002 N-STD :
Non-standard signals are processed. (Forced
NON-STD)
<Note>
Use the non-standard (N-STD) setting when
video or audio trouble occurs with signals from
laser discs or a satellite.
304 This selects the video signal processing.
SERVO REF 0000 AUTO :
Servo is synchronized with the input signal
during recording and editing, or with the REF
signal during playback.
With the EE output, the servo is synchronized
with the internal reference signal when there
is no REF signal.
0001
Servo is synchronized at all times with the
REF signal.
0002 AUTO1 :
Select this setting to use a standard signal as
the input signal.
The servo is synchronized with the input
signal during recording or editing and with the
REF signal during playback.
With the EE output, the servo is synchronized
with the input signal when there is no REF
signal.
The underlined items indicates the initial setting.
46
Description
signals
STD :
EXT :
No./Item
305 This sets the channel assignments for the
controller's analog audio preset when editing
EDIT RPLCE1 the digital audio of the VTR using a controller
which does not have a digital audio edit
preset control function.
This selects the channel concerned when the
VTR CH1 edit preset is set in compliance
with the ON or OFF presetting for the analog
audio signals designated by the controller.
0000
0001
0002
are
0003
306 The same type of setting as setup menu No.
305. This selects the channel concerned
EDIT RPLCE2 when the CH2 edit preset is set in
compliance with the ON or OFF presetting for
the analog audio signals designated by the
controller.
0000
0001
0002
0003
307 The same type of setting as setup menu No.
305. This selects the channel concerned
EDIT RPLCE3 when the CH3 edit preset is set in
compliance with the ON or OFF presetting for
the analog audio signals designated by the
controller.
0000
0001
0002
0003
Description
N-DEF :
Not set.
CH1 :
Compliance with analog CH1 edit preset.
CH2 :
Compliance with analog CH2 edit preset.
CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
N-DEF :
Not set.
CH1 :
Compliance with analog CH1 edit preset.
CH2 :
Compliance with analog CH2 edit preset.
CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.
N-DEF :
Not set.
CH1 :
Compliance with analog CH1 edit preset.
CH2 :
Compliance with analog CH2 edit preset.
CH1+2 :
Compliance with either analog CH1 or CH2
edit preset.