Panasonic AJ-SD965 Operating Instructions Manual page 41

Setup menus
USER menu
<BASIC>
No./Item
009 This sets the position of the characters on
the horizontal plane for the time code and
CHARA H-POS other super displays output to the VIDEO
OUT 3/SDI OUT 3 connector.
0000
:
0004
:
0016
010 This sets the position of the characters on
the vertical plane for the time code and other
CHARA V-POS super displays output to the VIDEO OUT
3/SDI OUT 3 connector.
[625i system] [525i system]
0000
:
0023
:
0028
<Note>
When the DISPLAY SEL setting causes
characters to extend beyond the edges of the
screen, the setting value is changed so that the
characters are automatically displayed in a
position on the screen.
011 This selects the display type for the super
display output to the VIDEO OUT 3/SDI OUT 3
CHARA TYPE connector as well as for displays such as the
setting menu, etc.
0000 WHITE : White characters against a
0001 W/OUT : White characters with a black
012 This sets the VTR's recording and playback
format.
SYS FORMAT
0000
DVCPRO50 (50 Mbps) is selected.
0001
DVCPRO (25 Mbps) is selected.
<Note>
The format complies with the setting of this
menu item when the tape is ejected.
The underlined items indicates the initial setting.
(continued)
Description
0
:
4
:
16
0 0000 0
: : :
23 0018 18
: : :
28 0022 22
black background.
border.
50M :
25M :
No./Item
013 This sets the format in which the tape is to
be played back.
PB FORMAT
0000 MANUAL :
The format complies with the setting of setup
menu No. 012 (SYS FORMAT) when a
DVCPRO cassette is inserted.
The format complies to the format recorded on
the tape when a DV or DVCAM cassette is
inserted.
0001 AUTO :
The format complies with the format recorded
on the tape.
<Notes>
OWhen an editing mode has been selected, the
"MANUAL" setting is forcibly established for
internal operations.
OWhen AUTO has been selected, the picture
and sound may be disturbed until the format is
detected after a tape is loaded.
015 This sets whether the recorder is to be
forcibly set to the EE mode and the player's
MONI playback signals are to be output to the
CONTROL monitor by pressing the recorder's PLAYER
button when a monitor has been connected
only to the recorder during deck-to-deck
editing.
0000 MANU :
The recorder is not forcibly set to the EE
mode.
0001 AUTO :
The recorder is forcibly set to the EE mode,
and the player's playback signals are output.
017 This selects the size of the characters for the
superimposed display output from the VIDEO
CHARA SIZE OUT 3 or SDI OUT 3 connector.
0000 NORMAL : Standard size
0001 LARGE : 4 times larger than the standard
<Note>
When LARGE has been selected, only time data
is displayed, regardless of the setup menu
No.008 (DISPLAY SEL) setting.
070 This selects the TV system.
TV SYSTEM 0000
0001
<Note>
After this setting is changed, turn off and back
on the power again to take it effect.
Description
size
525 : The 525 interlace/59.94 Hz
system is selected.
625 : The 625 interlace/50 Hz system
is selected.
41