Variable Memory Editing - Panasonic AJ-SD965 Operating Instructions Manual

Variable memory editing

Using the unit as a controller (deck-to-deck editing
mode recorder) to control the playback speed of the
VTR used as the player, editing can be performed in
speed variable mode.
$ Selecting the variable memory mode
When deck-to-deck editing (either the RECORDER
or PLAYER lamp lights) is to be performed, set the
initial speed (–1.0 to +2.0) by turning the search dial
with the SET button held down to transfer the unit to
variable memory mode.
$ Releasing variable memory mode
Press the RESET button while holding down the
SET button to release the unit from variable memory
mode.
The unit will also be released from this mode when
deck-to-deck editing operations are completed.
Variable memory editing operation
procedure
Variable memory editing operation can be performed
according to the following procedure.
1
Select the edit mode by pressing ASSEM button or
desired INSERT buttons.
2
Select VTR to
RECORDER or PLAYER button.
3
Register IN/OUT point by using SET button and
IN/OUT buttons.
The OUT point of VTR used as the player cannot
be registered.
DVCPRO 50
ON POWER
2 X DVCPRO
DV
SUPER REC INH TCG MODE
REMOTE
OFF
ON ON INT TAPE
OFF OFF EXT EE
PREVIEW/
AUTO EDIT
METER INPUT SELECT REVIEW
FULL/FINE
VIDEO AUDIO
HEADPHONES AUDIO MIX AUDIO MON SEL
1&2 3&4
CH2/4 REC CH1/3 MIX L R CH 1 CH 2 CH 3 CH 4
CH1/3
REC UNITY
PULL
CH1/3 CH2/4 REC CH2/4
PB VAR
AUDIO VOL SEL
32
be operated by pressing
1
XL/L/M-cassette
COUNTER ASSEM VIDEO CUE TC SEARCH
INSERT
RESET CH 1 CH 2 CH 3 CH 4
PF 1 PF 2 PF 3 PF 4
STAND BY PLAYER RECORDER SET
TC PRESET MENU PF
EDIT PLAY REC
PREROLL
A IN A OUT
REW STOP FF
SHIFT
IN SET OUT
3 2
4
After selecting VTR used as the player by pressing
PLAYER button, set the initial speed by the search
dial while pressing SET button.
5
Simultaneously pressing both SET button and
PREVIEW/REVIEW button results in automatic
prerolling for the both VTRs (player and recorder),
then the player VTR is operated at the set initial
speed up to the IN point.
6
After passing the IN point, turn the search dial to
memorize the playback speed of the VTR used as
the player.
7
When the tape has passed the OUT point set by
recorder, the memory of the playback speed will
terminate.
8
When AUTO EDIT button is pressed, variable
memory editing is executed.
Once editing has been executed, the memorized
speed will be cleared. The initial speed will not be
cleared however.
9
The result of editing can be checked by pressing
PREVIEW/REVIEW button.
DVCPRO 50
ON POWER
2
X DVCPRO
DV
SUPER REC INH
REMOTE
OFF ON
OFF
HEADPHONES AUDIO MIX AUDIO MON SEL
1&2 3&4
CH2/4 REC CH1/3
CH1/3 MIX L R
REC UNITY
PULL
CH1/3 CH2/4 REC CH2/4
PB VAR
AUDIO VOL SEL
EJECT
<Notes>
SHTL SLOW
O The content stored in the memory will be cleared in
PUSH
JOG
a mode other than the variable memory mode.
Also, the memory will be cleared when the power
switch is turned OFF.
PULL
O Phase adjustment is not made during playback to
the IN point of variable memory editing.
Therefore, depending on the VTR used as the
player and its speed setting, no guarantees are
made for the accuracy of the IN point.
O When variable memory editing is to be performed,
keep the speed set to within the speed range for
variable speed playback which can be guarantied by
the VTR used as the player.
8 4
XL/L/M-cassette
TCG MODE
ON INT TAPE
OFF EXT EE
COUNTER ASSEM VIDEO
INSERT
RESET CH 1 CH 2
PF 1 PF 2
STAND BY PLAYER RECORDER
TC PRESET MENU
EDIT PLAY
PREVIEW/
AUTO EDIT PREROLL
METER INPUT SELECT REVIEW
A IN A OUT
FULL/FINE VIDEO AUDIO
REW STOP
CH 1 CH 2 CH 3 CH 4
IN SET OUT
9 5
EJECT
SHTL SLOW
CUE TC
SEARCH
PUSH
JOG
CH 3 CH 4
PF 3 PF 4
SET
PF
REC
FF
SHIFT
PULL
4