Setup (Initial Settings) - Panasonic AJ-SD965 Operating Instructions Manual

Setup
(initial settings)
This VTR's main settings are performed while making
selections using a system of menus.
DVCPRO 50
ON POWER
2 X DVCPRO
DV
SUPER REC INH TCG MODE
REMOTE
OFF
ON ON INT TAPE
OFF OFF EXT EE
PREVIEW/
METER INPUT SELECT AUTO EDIT
REVIEW
FULL/FINE VIDEO AUDIO
HEADPHONES AUDIO MIX AUDIO MON SEL
1&2 3&4
CH2/4 REC CH1/3 MIX L R CH 1 CH 2 CH 3 CH 4
CH1/3
REC UNITY
PULL
CH1/3 CH2/4 REC CH2/4
PB VAR
AUDIO VOL SEL
Changing the settings
1
Press the (SHIFT+RECORDER).
MENU
The setup menu screen appears on the LCD
monitor, and the setup menu item number appears
on the counter display.
Each time the FF button is pressed (for about 1.5
seconds), the item number and item name are
selected and displayed alternately.
(If a setup was performed previously, the screen on
which the last change was made is displayed.)
O The setup menu screen is also displayed on the
TV monitor which has been connected to the
VIDEO OUT 3 connector or SDI OUT 3
connector.
2
Turn the search dial to select the item to be set.
The menu screen cursor (2) moves, and the item
number on the display flashes.
O When the dial is turned clockwise, the item
number is incremented from 001 5 002 5 003
5 004 and so on; conversely, when it is turned
counterclockwise,
decremented.
O When the FF button or REW button is pressed
while holding down the PLAY button, the next or
previous item is selected.
O Whenever possible, limit the use of the search
dial to the JOG mode.
34
FF button
4 3
XL/L/M-cassette
SHTL
COUNTER ASSEM VIDEO CUE TC SEARCH
INSERT
RESET CH 1 CH 2 CH 3 CH 4
PF 1 PF 2 PF 3 PF 4
STAND BY PLAYER RECORDER SET
TC PRESET MENU PF
EDIT PLAY REC
PREROLL
A IN A OUT
REW STOP FF
IN SET OUT SHIFT
1 6 2
MENU
the item number
3
At the position where the change is to be made,
turn the search dial while holding down the search
button.
The settings on the menu screen and display now
flash.
When the dial is turned clockwise, the setting
EJECT
number is incremented; conversely, when it is
turned counterclockwise, it is decremented.
SLOW
O At this time, when the RESET button is pressed
PUSH
JOG
while holding down the search button, the setting
value is returned to the factory setting.
PULL
4
Upon completion of the setting, release the search
button.
The item number now flashes.
O When the search dial is in the SHTL mode, the
item will move unless the dial is set to the center
position.
5
When other items are to be changed, repeat steps
2 4
to .
6
Press the SET button.
The changes are stored in the memory.
To disregard the new settings and restore the
old settings instead, press the RECORDER
button.
O To return the setup contents to the factory
settings (initial settings), press the RESET button
while the menu is displayed.
message is displayed.
If the PLAY button is now pressed, the factory
settings are reinstated.
<Notes>
is
O If the RESET button is pressed to restore the
factory settings, only the user files currently in use
are restored. The other user files remain
unaffected.
O The changes made to the SYSTEM menu
contents are recorded also by pressing the
RECORDER button to close the menu screen.
The following
S E T U P - M E N U I N I T S E T
Y E S < P L A Y > / N O < S T O P >