IBM LTO Ultrium 4 Installation And User Manual page 52

1. Create an FMR tape (see "Function Code 3: Create FMR tape" on page 23). A
2. Update the drive firmware (see "Function Code 2: Update drive firmware from
After updating the drive firmware, the FMR tape can be used as a data cartridge
by using the "Unmake FMR Tape" function (see "Function Code 8: Unmake FMR
tape" on page 27).
36
LTO Ultrium 4 Half High Tape Drive
single FMR tape can be used to update multiple drives if the drives are the
same drive type (e.g. LTO Gen4) and host interface (e.g. SCSI, SAS, fibre
channel).
FMR tape" on page 22).