Table of Contents
Advertisement
Chapter 2
CN24 (Front Audio Connector)
This connector gives you the option of a front-panel audio jack cable ext. to be plugged
into a special custom-designed system case.
Simply remove the two jumper caps at pin [5-6] and [9-10] then plug it into the (optional)
cable ext. connector. Pin [5-6] and [9-10] are shorted (default) to enable the back-panel
audio function.
JP2/3 (CPU Front Side Bus setting)
This cap setups up the CPU Ext. Clock Frequency. This function allows you to set the
CPU's FSB. The default setting is at pin [1-2], and your CPU's FSB will be automatically
detected.
It is recommended that you leave the default settings to prevent any burnout
on your CPU.
16
JP2
JP3
Definition
2-3
1-2
100 MHz
1-2
1-2
133 MHz
1-2
2-3
166 MHz
2-3
2-3
200 MHz
Advertisement
Table of Contents
