Table of Contents
Advertisement
3. PS2MS Wakeup from S3/S4/S5
This function allows the PS/2 mouse to activate the system from S3/S4/S5 power saving
modes. Available Options: [Disabled] and [Enabled].
4. USB Resume from S3
When enabled, the system is able to resume from S3 mode by a USB keyboard hot key
or mouse click.
5. VGA
VGA function is activated when option [On] is selected. Available options: [On], [Off].
6. LPT & COM
Both LPT and COM ports are activated when [LPT/COM] is selected. Available
options: [None], [LPT], [COM], [LPT/COM].
7. HDD & FDD
Both HDD and FDD are activated when it is set to [On]. Available options: [On], [Off].
8. PCI Master
This options control the activation of PCI slots. Available options: [On], [Off].
9. Power On by PCI card
When enabled, a PCI interface that receives a signal will activate the system from soft
off and green mode.
10. Wake Up On LAN / Ring
When enabled, a LAN/modem that receives a signal will activate the system from soft
off and green mode. You should connect the modem to the COM port and turn on the
resume event in green mode.
11. RTC Alarm Resume
When enabled, this setting allows the system to turn back on at a designated time of the
month. User must designate date of month and time of day.
12. IRQs Activity Monitoring
This feature allows you to monitor a list of IRQ, Interrupt ReQuests. When an I/O
device wants to gain the attention of the operating system, it signals this by causing an
IRQ to occur. When the operating system is ready to respond to the request, it interrupts
itself and performs the service.
Chapter 3
31
Advertisement
Table of Contents
