Acorp VIA KT400A User Manual page 17

JP6 (Enable/Disable USB 0/1 Device Wake-Up Jumper)
Pin Definition
1-2 Disable (default)
2-3 Enable
An USB keyboard hot key or an USB mouse click can activate this board. To use this
function, select a hot key of your choice at the USB Resume from S3 option under Wake
Up Events in the BIOS's Power On Management screen. You must also set this jumper's
cap to pins 2-3 to use this function.
FAN1 / FAN2 /FAN3 (CPU/System/Case Cooling Fan Connectors)
The board's hardware management is able to detect the CPU and system fan
speed in rpm (revolutions per minute). The wiring and plugging may vary depending on
the manufacturer. On standard fans, the red is positive (+12V) and the black is ground.
Chapter 2
13