Interface Menu - Panasonic AJ-D440 Operating Instructions Manual

Setup menus
USER menu
<INTERFACE>
No.
201
202
204
205
206
207
208
209
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
9P SEL 0000
0001
ID SEL 0000 OTHER
0001 DVCPRO
RS232C SEL 0000
0001
BAUD RATE 0000
0001
0002
0003
0004
0005
DATA 0000
LENGTH 0001
STOP BIT 0000
0001
PARITY 0000
0001
0002
RETURN 0000
ACK 0001
– 34 –
This selects whether the 9P connector functions when the
OFF
REMOTE/LOCAL switch has been set to REMOTE.
ON
0:
Do not function
1:
Function
This selects the ID information which is returned to the
controller.
0:
20 25H
1:
DVCPRO's, own ID is returned (F0 33H).
These settings are for selecting whether the RS-232C
OFF
connector is to function when the REMOTE/LOCAL switch is
ON
set to REMOTE.
0: Connector does not function.
1: Connector functions.
These settings are for selecting the RS-232C communication
300
speed (baud rate).
600
1200
2400
4800
9600
These settings are for selecting the RS-232C data length.
7
(Unit: bit)
8
These settings are for selecting the RS-232C stop bit length.
1
(Unit: bit)
2
These settings are for selecting the none, odd or even for the
NON
RS-232C parity bit.
ODD
0: Parity bit is not used.
EVEN
An odd number of bits is used for the parity system.
1:
An even number of bits is used for the parity system.
2:
These settings are for selecting whether the ACK code is to
OFF
be returned when a command is received from RS-232C.
ON
0: ACK code is not returned.
1: ACK code is returned.
Description