Interface Menu - Panasonic AJ-D455 Operating Instructions Manual

Setup menus
USER menu
<INTERFACE>
No.
201
202
204
205
206
207
208
209
The underline on the setting item denotes the initial setting.
Item Setting
Superimposed Superimposed
No.
display display
9P SEL 0000
0001
ID SEL 0000
0001 DVCPRO
0002
RS232C SEL 0000
0001
BAUD RATE 0000
0001
0002
0003
0004
0005
DATA 0000
LENGTH 0001
STOP BIT 0000
0001
PARITY 0000
0001
0002
RETURN 0000
ACK 0001
OFF This selects whether the 9-Pin connector functions when the
REMOTE/LOCAL switch has been set to REMOTE.
ON
0: Do not function
1: Function
OTHER This selects the ID information which is returned to the
controller.
0: 20 25H
ORIG
1: DVCPRO's, own ID is returned (F0 33H).
2: The unit's own ID (A0 3CH) is returned.
<Note>
Set "ORIG" only when the unit is connected with a Panasonic
controller (such as the AJ-A900, optional accessory).
These settings are for selecting whether the RS-232C con-
OFF
nector is to function when the REMOTE/LOCAL switch is set
ON
to REMOTE.
0: Connector does not function.
1: Connector functions.
300 These settings are for selecting the RS-232C communication
speed (baud rate).
600
1200
2400
4800
9600
7 These settings are for selecting the RS-232C data length.
(Unit: bit)
8
1 These settings are for selecting the RS-232C stop bit length.
(Unit: bit)
2
These settings are for selecting the none, odd or even for the
NON
RS-232C parity bit.
ODD
0: Parity bit is not used.
EVEN
1: An odd number of bits is used for the parity system.
2: An even number of bits is used for the parity system.
These settings are for selecting whether the ACK code is to be
OFF
returned when a command is received from RS-232C.
ON
0: ACK code is not returned.
1: ACK code is returned.
26
Description