Error Messages - Panasonic AJ-D440 Operating Instructions Manual

Error messages

When a warning occurs in this unit, an error number appears at the counter display.
Opening the DIAG menu will display the error description on the monitor. Also, when an
abnormal operation is detected in this unit, an error number flashes on the counter display.
DIAG menu
This display the VTR information.
VCR information includes "WARNING" information and "HOURS METER" (usage time)
information. A DIAG menu appears on the monitor when the monitor is connected to the
VIDEO OUT 3 connector on the connector section.
Displaying the DIAG menu
1
2
3
"WARNING" information display
•
A warning message is displayed on the monitor whenever a warning occurs. When
warnings have not been detected, "NO WARNING" is displayed on the monitor, and "Err–"
is displayed on the counter display.
•
When multiple warning occur, the descriptions for each warning can be checked by using
the cursor buttons (
Press the DIAG button.
The DIAG menu screen is displayed on the monitor, and the error number is displayed
on the counter display.
The "WARNING" information and "HOURS METER" information can be switched by
pressing the cursor buttons (
Press the DIAG button again to return to the original display.
ON POWER
OFF
LEVEL
CTL
TC
CH 1
UB
AUDIO
AUDIO
REC LEVEL
MONITOR
HEADPHONES
CH 1
CH 2
MIX
CH 2
, ).
, ).
CH CONDITION
COUNTER/
REMAIN
RESET
SET
MENU
TC
INT
EXT
TC
PRESET DIAG
FILE
PAGE
Y PB PR DIGITAL
DIGITAL
REMOTE
CMPST AES/EBU
ANALOG
S-VIDEO ANALOG LOCAL
VIDEO IN AUDIO IN
2 1, 3
– 53 –
REW STOP FF PLAY REC
EJECT