Panasonic AJ-D440 Operating Instructions Manual page 5

Features
(continued)
Multi-function input/output interfaces
• Analog input/output
Component (Y, P
provided.
•
Digital audio input/output
AES/EBU audio input/output is possible when the optional digital audio interface board (AJ-
YA655P) is used.
•
Serial digital input/output
Serial digital (SMPTE 259M-C, 272M) input/output is possible when the optional component
serial interface board (AJ-YA750P) is used.
<Note>
The AJ-YA655P board, sold separately, is necessary when using serial digital audio
(SMPTE 272M).
• 9-pin (RS-422A)/(RS-232C) remote
The standard 9-pin serial (RS-422A) connector or RS-232C connector is used.
2-channel high-sound-quality digital audio
Sound can be edited separately for two channels, and channel mixing capabilities are also
available. One channel is provided for the analog cue track.
Information selected from audio CH1 and CH2 can be recorded in the cue track memory.
(Set at the set up menu.)
•
Cue track input and output connectors are not provided.
Automatic editing functions from the external controller
AJ-D450 allows both assemble and insert editing from the external controller.
Menu-driven setup
The setup settings, which are conducted prior to operating the unit, are performed while
viewing the setup menus either on the unit display or TV monitor.
, P ) and composite and S-VIDEO signal input and output connectors are
B R
– 5 –
(AJ-D450 only for input)
(AJ-D450 only for recording)
(only AJ-D450)