Interface Menu - Panasonic AJ-D650 Operating Instructions Manual

Setup (setting) menus
USER menu
<OPERATION>
No.
112
113
The underline on the setting item denotes the initial setting.
USER menu
<INTERFACE>
No.
201
202
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed No. Superimposed
display display
AUTO REW 0000
0001
MEMORY 0000
STOP 0001
Item Setting
Superimposed No. Superimposed
display display
9P SEL 0000
0001
OTHER
ID SEL
0000
0001 DVCPRO
– 3 0 –
Description
OFF
This selects whether to rewind the tape automatically to the
ON
tape start when the tape end is detected.
0: The tape stops at the tape end.
1: The tape is rewound to the tape start.
OFF
This selects whether the VTR is to stop automatically when
ON
the counter value reaches "0" during a fast forwarding or
rewinding operation in the CTL mode.
0: The VTR does not stop.
1 : The VTR stops automatically.
<Notes>
1. The stop mode concerned is either the stop or the still-
picture (SHTL STILL) mode depending on the setup menu
No. 313 (AFTER CUE-UP) setting.
2. When both the AUTO REW function and MEMORY
function have been selected at the same time, the AUTO
REW function takes precedence.
Description
OFF
This selects whether the 9P connector functions when the
REMOTE/LOCAL switch has been set to REMOTE.
ON
0: Do not function
1: Function
This selects the ID information which is returned to the
controller.
0: 20 25H
1: DVCPRO's, own ID is returned (F0 33H).