Time Code Menu; Video Menu - Panasonic AJ-D440 Operating Instructions Manual

USER menu
<TIME CODE>
No.
507
508* TCG CF
509
510* RUN MODE
511*
<VIDEO>
No.
600* P
601* INT BB
602* INPUT
603* OUT
604
605
* The Setup menu can
only be displayed for
the model AJ-D450.
The underline on the setting item denotes the initial setting.
(continued)
Item Setting
Superimposed Superimposed
No.
display display
PHASE 0000
CORR 0001
0000
FLAG 0001
DF MODE 0000
0001
0000
0001
TC OUT 0000
REF 0001
Item Setting
Superimposed Superimposed
No.
display display
/P 0000
B R
IN LV 0001
0000
SIG 0001
0000
C KILL 0001
0000
VSYNC 0001
V-MUTE 0000 N-MUTE
SEL 0001 LOW – RF
CC (F1) 0000 BLANK
BLANK 0001
– 39 –
This selects whether to control the phase correction of the
OFF
LTC generated by the TCG.
ON
0:
Phase correction control is not performed.
1: Phase correction control is performed.
This selects whether the CF flag of the TCG is to ON.
OFF
0: CF flag is OFF.
ON
1:
CF flag is ON.
This selects the DF/NDF mode for CTL and TCG.
DF
0: Drop frame mode.
NDF
1:
Non-drop frame mode.
No. 509 is valid when the CONTROL is LOCAL or LOCAL
ENA of item 004 to "ENA".
This selects the time code generator run mode.
REC
0:
Generator runs only during recording.
FREE
1:
Generator runs during usual operation.
<Note>
Even if "0" is selected, the time code generator runs during
usual operation when "1" is selected at the setting menu
No. 504 (REGEN MODE).
This is used to switch the phase of the time code, which is
V OUT
output from the TIME CODE OUT connector, for the external
TC IN
LTC input when the TC INT/EXT switch is at the EXT
position. (In EE mode only)
0: Time code is synchronized with output video signal.
1:
Time code is synchronized with external time code input.
II
M This selects the component input signal level.
II
B-CAM 0: M level.
1: ß cam level.
OFF This selects whether to generate the internal black burst
BB signal.
0: Signal is not generated.
1: Signal is generated.
B/W This selects color killer processing for the video input signals.
AUTO 0:
The signals are forcibly processed as B/W signals.
1:
The signals are automatically processed.
This selects whether to float the vertical sync position of the
N-VF
video output in order to align the video output phase with the
VF
input in the EE/record/edit modes.
0: Signals are not floated.
Signals are floated.
1:
This selects whether the video output signal is to be muted
when the blank portion of the tape is detected during
playback.
0:
No muting (picture freezes).
1:
Muting (picture turns grey).
This selects ON or OFF for the closed capture signal in the
first field.
THRU
0:
Forced blanking performed.
1: Blanking not performed.
Description
Description