Edit Timing Adjustment; Program Editing - Panasonic AG-DV2000P Operating Instructions Manual

Edit Timing Adjustment

When performing editing in conjunction with a unit which has a different mechanism, there may be a lag in the edit start point due
to a deviation between the time a pause cancellation signal is received by the recording unit and the time recording actually
begins.
Edit Timing Adjustment is used to compensate the edit start and end time in light of this start-up time deviation.

Program Editing

After setting edit start/end points, the actual editing
operation may start slightly before or slightly after the
position that was set, depending on the equipment that is
connected. The procedure described below can adjust the
edit timing in order to correct for errors of up to
approximately ±1 second in the edit start points and edit
end points on the playback unit.
Example: Video Insert
Operations
Press EDIT MENU.
Select Program Editing, and then
Press OK.
Select desired editing operation, and
then press OK twice.
62
On Screen Display