Editing Functions - Panasonic AG-DV2000P Operating Instructions Manual

Editing Functions

Using this VCR, 4 types of One-Touch-Edit, 3 types of
Manual Editing and 3 types of Program Editing can be
selected.
In Program Editing, after setting the edit start/end point,
editing can be performed automatically. Edit programs can
be set up to 10 scenes for each editing function (40 scenes
for Assemble editing).
Copying
Allows the re-recording (copying) of the picture and sound
from one tape onto another tape.
Playback Unit
Subcode
Picture
Sound(STEREO1)
Sound(STEREO2)
Video Insert
Allows the partial replacement of the picture on a recorded
tape. Sound is left in its original state.
Audio Insert
Allows the partial replacement of sound on a recorded tape.
Picture is left in its original state.
AV Insert
Allows the partial replacement of the picture and sound on a
r e c o r d e d t a p e .
Recording VCR
Subcode
Picture
Sound(STEREO1)
Sound(STEREO2)
22
Pictures from the Playback Unit
Sounds from the Playback Unit
One-Touch-Edit
Assemble Editing (page 36)
Insert Editing (Video, Audio, AV) (page 38)
Audio Dubbing (page 38)
Audio Mixing (page 40)
Manual Editing
Copying (page 42)
Insert Editing (Video, Audio, AV) (page 44)
Audio Dubbing (page 46)
Program Editing
Assemble Editing (page 48)
Insert Editing (Video, Audio, AV) (page 52)
Audio Dubbing (page 56)
Recording Unit
Subcode
Picture
Sound(STEREO1)
Sound(STEREO2)
Performing the Copying operation on a tape that was
recorded in 12bit audio mode.
Edited Tape
Subcode
Picture
Sound(STEREO1)
Sound(STEREO2)
Performing the AV Insert editing operation on a tape
that was recorded in 12bit audio mode.