Search Functions; Index Search System; Photoshot Index Search System - Panasonic AG-DV2000P Operating Instructions Manual

Digital video cassette recorder
Hide thumbs Also See for AG-DV2000P:
Table of Contents

Advertisement

Search Functions

Index Search System

It is easy to find the beginning of each recording because a
special index signal is recorded at the start of each recorded
segment on the tape.
For example:
Searching for the 2nd recorded segment in the forward
direction.
1
Press SEARCH SELECT so that "S - -" appears on the
VCR display.
(This operation is performed while the VCR is in the stop
mode or normal playback mode.)
2 Press INDEX/PHOTO
After finding the specific
recorded segment, playback
starts automatically.
To stop the operation at any time
(STOP).
Press
For the reverse direction, press INDEX/PHOTO
Up to 20 index signals can be searched for in either
direction.
When the opposite INDEX/PHOTO is pressed, the number
shall be decreased until 1 is reached.
The figure on the display is reduced by 1 each time an
index signal is located.
The INDEX search function can only work correctly if the
index signals are spaced at least 5 minutes apart.
Repeat the procedure if the index signal for the specified
number is not found.
Recording Index Signals
Index signals are recorded in the following cases.
When a recording is started by pressing REC.
When REC on the remote controller or the editing
controller is pressed during recording.
Display Symbols
twice.
Photoshot Index Search
System
Photo shot index signals are automatically recorded when a
Panasonic Digital Video Camera is used for Photo shot
Mode. Photo shot images are searched using these signals,
and when such an image is located, the image is played
back as a still picture.
For example:
Searching for the 2nd photo shot image in the forward
direction.
1
Press SEARCH SELECT so that "PHOTO S - -"
appears on the VCR display.
2 Press INDEX/PHOTO
After finding the specific image,
playback starts automatically.
To stop the operation at any time
Press
(STOP).
For the reverse direction, press INDEX/PHOTO
Any of up to 20 images ahead on the tape can be
designated.
When the opposite INDEX/PHOTO is pressed, the
number shall be decreased until 1 is reached.
It may not be possible to search for a particular image
properly if photo shot images have been recorded
continuously.
At every press of the corresponding button, the tape is
fast-forwarded or rewound to the next still picture recorded
in the Photoshot Mode.
After reaching the next still picture, the still picture is
played back continually together with the sound (only for
approx. 4 seconds).
Display Symbols
twice.
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents