Adjustment Procedures; Mechanical Adjustment Procedures; Disassembly Of Cabinet Parts - Panasonic Quasar Omnivision PV-M1326 Service Manual

II. ADJUSTMENT PROCEDURES
A. MECHANICAL ADJUSTMENT PROCEDURES

1-1. DISASSEMBLY OF CABINET PARTS

Model : A,B,C,D,E,F,G,H,,I,J,K
DISASSEMBLY FLOWCHART
This flowchart indicates the disassembly steps of the cabinet
parts and the P.C. Boards in order to gain access to the item(s)
to be serviced. When reassembling, perform the step(s) in the
reverse order.
Caution : Disconnect AC Plug before disassembly.
1 Back Cover
2 VCR Unit
Model : K
3 CRT Unit
5 TV Stereo
Amp C.B.A.
6 Top Shield Plate Ass'y
7 TV Main C.B.A.
8
VCR Chassis Unit
9 VCR Main C.B.A.
10 Cassette Up Ass'y
11 Mechanism Chassis
Fig. D1
Step
/Loc.
No.
4
Operation I
and
Operation II
C.B.A.s
10
11
A
How to read chart shown above :
A : Order of steps in Procedure
B : Part to be removed or installed.
C : Fig. No. showing Procedure or Part Location.
D : Identification of part to be removed, unhooked, unlocked,
2-1
DISASSEMBLY METHOD
Part Fig.
No.
1 Back Cover D2-1 7(S-1)
D2-2
2 VCR Unit D3, P354, Anode Cap,
D4 P3004(Model : H,K),
P4152(Model : A,B,C,D,E,F
P4153(Model : H)
P4903 P4905(Model : K),
P4904(Model : K),
CRT C.B.A.,
DeflectionYoke Connector,
Degaussing Coil Connector
3 CRT Unit D3 4(S-2)
4 Operation I D5 P3004 P4153(Model : A,B),
and Operation P6001, 6(L-1)
II C.B.A.s
Model : K
5 D6 P4902, P4001, Clamper
TV Stereo
Amp C.B.A.
6 Top Shield D6 5(S-3)
Plate Ass'y
7 TV Main D7 P201, P202, P203, P801,
C.B.A. 4(L-2)
8 VCR Chassis D8 2(S-4), (S-5), (S-6)
Unit Chassis Angle, (L-3)
9 VCR Main D9 (S-7), (S-8), P6002
C.B.A. P2501, P3501
Cassette Up D10 2(S-9), 2(S-10)
Ass'y
Mechanism D10
Chassis
B C
When reassembling, perform the step(s) in the reverse
order.
These numbers are also used as the identification
(location) No. of parts in Figures.
released, unplugged, unclamped, or unsoldered.
2(S-1)=2 Screws(S-1);
Remove Note
G,H,I,J),
---------------------------
D
3(L-1)=3 Locking Tabs(L-1)
-
1
2
-
-
-
3
4
-
5
6