Panasonic AG-DV2000P Operating Instructions Manual page 31

One-Touch-Edit
1 Press SET UP.
2 Select One-Touch-Edit.
3 Select OFF or ON.
OFF: Select this whenever you are performing any
editing function other than One-Touch-Edit.
ON: Select this in order to perform One-Touch-Edit.
One-Touch-Edit is possible only when EDIT CONTROL
is set to either DV or EDIT, and EDIT MODE is set to
RECORDER.
4 Press EXIT to exit the On Screen Display.
AV-IN Color Level
1
2
On Screen Display
3
4
5
Notes:
Press SET UP.
Select AV-IN Color Level.
Select SOURCE or ADJUST.
SOURCE: Normally set this position.
ADJUST: To adjust the color level of the input
external recording source connected to A1
or A2.
If you select ADJUST and then press OK, the AV-IN Color
Level screen is displayed.
Adjust the color level using
Press to make the color lighter
to make the color darker
Press
The setting can be adjusted over a range of ±20.
Press SET UP, and then press EXIT to exit the On Screen
Display.
If INPUT SELECT is set to DV IN, the Audio Mode,
AV-IN Color Level, and AV-IN Hue Level cannot be selected
on SET UP screen.
The AV-IN Color Level and AV-IN Hue Level can be selected
in following cases:
INPUT SELECT is set to A1 or A2;
When the VCR is in stop mode
31