Panasonic AG-DV2000P Operating Instructions Manual page 45

Search for the edit start point on the
playback unit.
Press RECORDER and JOG/
SHUTTLE.
The picture from the recording VCR appears on
the screen.
Search for the edit start point
on the recording VCR.
Select Start Insert.
Press OK.
Editing begins.
Press EDIT MENU to stop editing.
Operation now returns to the screen which
appears in step 3. This makes it possible to
continue with editing or change the point at which
editing is to start.
Press EXIT.
The On Screen Display disappears.
Notes:
AV Insert is not possible in the following cases:
When the tape in the recording VCR (this unit) is:
Recorded in 16bit audio mode;
Recorded in LP mode:
Blank, or contains a blank portion in the middle.
When INPUT SELECT is set to DV IN.
In order to ensure that the editing operation is performed
properly, the editing points should be set at least 20
seconds after the beginning of the tape.
The pause operation may be indicated on the display of the
playback unit even though the playback unit is actually
playing the tape in slow motion.
Up to ±1 second of slight deviation in the specified edit start
position can be corrected. See page 64 for Edit Timing
Adjustment.
45