Manual Editing - Panasonic AG-DV2000P Operating Instructions Manual

Edit Timing Adjustment (continued)

Manual Editing

If there is a deviation in the results of a manual editing
operation, the timing of the edit start (In) position on the
playback unit can be adjusted by approximately ±1 second.
Perform the procedure described below when setting an edit
start point in any editing mode.
Example: Manual Copying
Operations
Select Timing Adjust, and then press
OK.
Adjust the timing for the edit start point
by setting the amount of the
discrepancy for the start-up time.
The setting is displayed in
frames (apporoximately 1/30
of a second) units.
if the start point
Press
is too early; press
Each time the button is pressed, the tape moves
by 1 frame.
Corrections can be made in the range of ±30
frames.
Press OK.
Select Start Copying (Insert,
Dubbing), and then press OK.
If the results of editing indicate that the
adjustment is inadequate, repeat steps 1-3.
64
if it is too late.
On Screen Display