Tape Operation (Repeat Play, One Minute Skip, Zero Search, Auto Functions) - Panasonic Omnivision PV-M1347 Operating Instructions Manual

Combination vcr
Hide thumbs Also See for Omnivision PV-M1347:
Table of Contents

Advertisement

a
Tape Operation
Your Combination VCR is equipped with
several time saving features as well as
convenient automatic functions which make
tape operation easier than ever.
© GW
SON
Sy
¡OS
Auto Operation Functions
Auto Shut Off
In TV or Game mode, when a broadcast
signal is not received for 5 minutes, the
Combination VCR will automatically power
off (except when LINE INPUT is selected).
In Playback mode, when a Video signal is not
detected for 5 minutes, the Combination VCR
will automatically power off and the tape will
be rewound.
* This feature is deactivated when any
button on the unit or remote control is
pushed even if there is no signal present.
Auto Playback
When a tape is inserted, the power turns
on (Auto). If the record tab* is removed,
playback begins (Auto).
Auto Rewind
When a tape reaches its end during playback,
fast forward or manual record the Combination
VCR will rewind and go into Stop mode.
Playback Auto Eject (Repeat Play is "OFF.")
When a tape without a record tab* is played to
its end, the Combination VCR will rewind and
then eject the tape.
Rec Auto Eject
After a tape reaches its end during
normal recording, the Combination VCR will
rewind and then eject the tape.
Memory Rewind Off
When POWER is pushed during rewind,
rewind will be completed even though the
Combination VCR turns off.
*For record tab information, see page 23.
Repeat Play
You can set your Combination VCR up to play a recording over and over.
D
SE Push MENU to
|
display the MAIN
| O | MENÚ.
MAIN MENU
Tee
PushA
Y dD
to
CH
REPEAT
PLAY
: OFF
Push [> repeatedly | 2=rer
: ON
to select "ON" or
"OFF"
SET UP VCA
SELECT :4 ¥ KEY
END
When REPEAT PLAY : "ON" is selected, the Combination VCR will
play to the end of a tape, or until it reaches a blank portion 30 seconds
or more, (Erased portions of tape are not considered blank.) Then, the
Combination VCR will automatically rewind the tape and play it again
and again until you cancel repeat play. The REPEAT indicator lights on
the front panel.
e All function buttons (REW, FF, etc.) are operational during Repeat Play.
Push MENU to exit the SET UP VCR
Q
Q |
screen. Then push 4 ¥ <j Dto select
VE
| "EXIT" Now, push MENU to exit the
0
| MAIN MENU.
| C
N
You may also turn the repeat play feature on and off at the
NOTE}
Combination VCR by pushing PLAY during playback once
| K
or twice unti! the repeat indicator lights up (ON), or goes out (OFF).
One Minute Skip
With this feature, you can skip over commercials recorded on a tape.
| zero) | Push ZERO/1MIN in Play mode.
O)
* The Combination VCR will go into FF search mode
1 MIN
and skip over 60 seconds of recorded time.
Then, normal playback will resume.
Zero Search
You can reset the Timer Counter to zero and then return to that point.
Push DISPLAY to
OP
TEA Er
display the Time
Sc
Counter overlay.
Push COUNTER
RESET to reset the
Time Counter.
Ee
* Reset to 0:00:00 at
whatever point you wish
on the
A
AA
Push ZERO/1MIN in
Stop mode.
e The Combination VCR will go into FF or REW
mode and stop at the last point the Time Counter
was set to 0:00:00.
12: 00AM
0:00
se
>
C
O
<
O
mo
O
Lo]
Me
=
Y
=
O
>

Advertisement

Table of Contents
loading

This manual is also suitable for:

Omnivision pv-m1357w

Table of Contents