Tape Operation (Commercial Advance, Movie Advance, Index Search, Repeat Play, Zero Search, Shuttle Search, Auto Functions) - Panasonic Omnivision PV-8664 Operating Instructions Manual

Hide thumbs Also See for Omnivision PV-8664:
Table of Contents

Advertisement

Tape Operation
al
Our Vacation
||
*Important: tf the remote control POWER, ACTION, PROG, CHA/¥, INDEX/ M/A SKIP or ADD/DLT button
does not work when pressed, press the VCR button on the remote and try the button again.
COMMERCIAL ADVANCE®
COMMERCIAL ADVANCE? detects and marks the beginning and end points of commercials on your tape for
recordings over 15 minutes in length. When the COMMERCIAL ADVANCE? marked tape is played back, the VCR
automatically advances through the commercial segments at high speed. You can also set this feature to Manual so
as to have more control over the advance process. The effectiveness of this system can vary due to differences in the
way television stations broadcast. See page 26 for answers to the most commonly asked questions about this feature.
[Z check list before you begin
COMMERCIAL
ADVANCE®
Marking
When the COMMERCIAL ADVANCE RECORD setting is ON, the VCR
automatically rewinds the tape after a recording has been made and
marks the beginning and end of any detected commercial blocks.
O All connections have been made and the
One Time Setup is completed.
E Your TV and VCR are plugged in and
After marking is done, the tape is returned to the end of the recording.
turned on.
Commercials are not erased from the tape.
C TV is tuned to the VCR channel
(CH 3 or 4).
1 Press ACTION: to display the menu. | sue ves
SET CLOCK
2 Press AV to select "SET UP
Ser ie KEY
FEATURE," and then press >
END-
SIAETION REY
to display the "SET UP FEATURE"
TIME
STAMP
: OF
F
SET UP COMMERCIAL
ADV.
3 Press AV to select "SET UP
E
le
COMMERCIAL ADV.," and then
SET
ik KEY em
press P to display the "SET UP
I2:C62*
ND
COMMERCIAL ADV." screen.
4 Press AY to select "C/A
»
SET UP COMMERCIAL ADV.
RECORD," and then press
ALMA
: ON
ed
zs
C/A
PLAYBACK
:
O
to set "ON" or "OFF.
Peet
CIN
ON
Timer recordings, VCR Plus
SELECT:4 ¥ KEY
recordings, and One Touch
Du.
gee CKEN
Recordings are marked automatically.
The screen at right appears when STOP
EUR
is pressed during a normal recording. — | Mark COMMERCIALS IN SHE
Select one of the following:
PROGRAM YOU RECORDED.
Press the 1 NUMBERED key to
mark the recording now.
i
i
: PUSH
1 KEY
The screen below right will appear.
NSn I REY
Press the 2 NUMBERED key, to
: PUSH ACTION KEY
mark the recording later, after
the power has been tumed off.
* |f the tape is rewound and another
NOW MARKING COMMERCIALS
recording started before the power
is turned off, the commercials may
not be marked correctly.
Press ACTION to cancel the marking
of this recording.
CANCEL .: PUSH STOP KEY
OFF
The VCR will not mark commercials.
Off should be selected when you are editing
or dubbing a tape, or when you simply do not
When using the timer to record
wish to use this feature.
two adjacent shows on the same
channel, better accuracy can be
à
obtained by programming each
5 Press ACTION three times to return
show separately.
to the normal screen.

Advertisement

Table of Contents
loading

Table of Contents